:: Futurasmus KNX Group :: EIB/KNX Leading Wholesaler

The interface EM KNT 002 has 4 Analog/Digital independent channels which may
be used depending on the parameterization by the ETS4:
- Binary inputs: it can be connected to a pushbutton, a switch or a conventional
voltage-free binary sensor .
- Analog inputs: itcan work as temperature sensor by connecting an external
probe. Then the temperature of the room can be controlled (maximun 4
temperature sensors).
- Thermostat: It can be configured and enabled 4 independent thermostats.
Each one of the 4 channels can work as:
- Switch: to turn the light ON and OFF.
- Switch and Dimmer: to turn ON/OFF and dim the light.
- Multiple Switch: to turn ON/OFF the light depending on the number of pressings.
- Sequential Switch: to do sequential switching ON/OFF.
- Blinds/Shutters Control: to move the blinds/shutter by pushbuttons or switches.
- Scenes Control: to save and recover a light scene.
- Values Sending: to send different measures or values, for example the light
level, temperature,...
- Impulse Counter: it allows, for example, counting the number of operations.
- Temperature sensor: sends the temperature value of the room. We can connect
4 temperature sensors.
- Thermostat: It can be configured and enabled 4 independent thermostats.
Furthermore it is independent of the quantity and type of inputs (Analog/Digital)
are configured.

• 4-channels universal binary/analog interface
• Mounting: behind the pushbutton, inside the universal mechanism box
• Bus supply
• Functions: ON/OFF, Dimming, Blinds control, Scenes control or Temperature control (with external probe)
• Programmation by ETS4:

16248

EM KNT 002

4-CHANNELS UNIVERSAL BINARY/ANALOG INTERFACE

INPUTS

	16247	RE KNT 000	Universal 1-channel Dimmer for RLC loads and LED lamps	ACTUATORS - OUTPUTS
	Universal 1-channel Dimmer for RLC loads • Load: LED lamps, CFL, Incandescent or Halogen lamps • Breaking capacity: up to 1.000W with incandescent lamps • DIN-rail mounting • Power supply: 230V~ • Programamation by ETS

16247

RE KNT 000

UNIVERSAL 1-CHANNEL DIMMER FOR RLC LOADS AND LED LAMPS

ACTUATORS - OUTPUTS

	16249	EM KNT 001	4-channels universal pushbutton binary interface	INPUTS
	• 4-channels universal pushbutton binary interface • Mounting: behind the pushbutton, inside the universal mechanism box • Bus supply • Functions: ON/OFF, Dimming, Blinds control or Scenes control • Programmation by ETS:

16249

EM KNT 001

4-CHANNELS UNIVERSAL PUSHBUTTON BINARY INTERFACE

INPUTS

	16250	DM KNT 001	IR Motion detector	DETECTORS
	• IR Motion detector • Flush ceiling mounting • Functions: motion detection, constant light control, twilight switch, brigthness & temperature sensor • Bus supply • Programmation by ETS

16250

DM KNT 001

IR MOTION DETECTOR

DETECTORS

	16252	RE KNT 110	1-channel 1/10Vdc Dimmer	ACTUATORS - OUTPUTS
	• One-channel modular 1-10VDC dimming actuator (up to 200 equipments). • Protected against overloads and short-circuits. Built-in heating protection. • Anti-panic input for safety systems. • Installation in DIN rail. • Power supply 230V. • Programing by

16252

RE KNT 110

1-CHANNEL 1/10VDC DIMMER

ACTUATORS - OUTPUTS

	16246	FA KNT 001	KNX Power supply 640mA	SYSTEM DEVICES
	• Power supply of 640mA , to generate and monitor power Bus EIB / KNX. • The bus line is isolated from the network by the coil. • There is a second auxiliary output not isolated from the network.

16246

FA KNT 001

KNX POWER SUPPLY 640MA

SYSTEM DEVICES

	16251	DM KNT 002	IR Motion detector with constant light control	DETECTORS
	Wall or surface ceiling mounting KNX motion detector. It incorporates as main function the motion detection. In addition it is possible to enable these functions: - Twilight switch - Constant light control - Signal monitoring - Brightness sensor - Temperature sensor These additional functions are independent and can or not be enabled. Wall or surface ceiling mounting, with coverage of 180º and a maximum of 10m in leght at 2m high. Possibility of adjusting the delay time and Lux setting by ETS or via control knobs

16251

DM KNT 002

IR MOTION DETECTOR WITH CONSTANT LIGHT CONTROL

DETECTORS

16657

RE KNT RGB

Dimming actuator to control RGBW LED,12Vcc - 24Vcc, 4x16A. Máx. 32A

ACTUATORS - OUTPUTS

Dimming actuator to control RGBW LED strips .

• It has 4 output channels 16A per channel , with a maximum capacity of 32A.
• Control via KNX PT ( Twisted Pair to 24VDC ).
• Protected against overloads and short-circuits.
• Formato modular, para su instaación sobre carril DIN.
• Anti-panic input for safety systems.
• Programing by ETS4.

16657

RE KNT RGB

DIMMING ACTUATOR TO CONTROL RGBW LED,12VCC - 24VCC, 4X16A. MÁX. 32A

ACTUATORS - OUTPUTS

	16903	CO KNX 002	RF-KNX / KNX- PT media coupler	RF
	• RF-KNX / KNX- PT media coupler. • Interface between wireless and twisted-pair devices. • It allows the transmission of telegrams from the radio modules to KNX Bus devices and vice versa (bidirectional communication). • Can be used together with devices to control lighting, HVAC, blinds/shutters and main purpose devices. • Up to 16 bidirectional RF or TP independent channels. • Power supply: BUS KNX 24VDC. • Installation in DIN rail.

16903

CO KNX 002

RF-KNX / KNX- PT MEDIA COUPLER

	18447	IT KNX 001	WIRELESS 1-CHANNEL SWITCH	RF
	It is based on a RF-KNX actuator which emulates the working mode of the channel code CH_Light_Actuator_Scene 0x103. It is composed by: LED (A), Time Selector (B), Commissioning Pushbutton (C) and Working Mode Selector Switch (D). CHARACTERISTICS Working mode selector switch for the setting-up and commissioning: - B: delete a link from the receiver channel. - P: link programming of the transmitter or receiver channel. - F: normal operation. - A: normal operation with repeater function. - R: delete all links from the transmitter and receiver channels. Operation as impulse relay or time switch. Possibility of working as RF signals repeater. Possibility of wiring an additional wired pushbutton to: - Local control of the load connected to the device. - Remote control, via RF, of one or several linked receivers. Compatible with ISO-IEC 14543-2 KNX protocol. Two objects: - The auxiliary pushbutton answers to the object CH_PB_Toggle 0x02. - The actuator answers to the object CH_Light_Actuator_Scene 0x103

18447

IT KNX 001

WIRELESS 1-CHANNEL SWITCH

18448

PE KNX 001

KNX-RF WIRELESS 1-CHANNEL BLINDS/SHUTTERS ACTUATOR OR 2-CHANNELS SWITCHING ACTUATOR

ACTUATORS - OUTPUTS

Wireless actuator for switching or controlling blinds/shutters compatible with the

KNX-RF Standard.

It has 2 output channels which allow to control one blind/shutter or to use them as a two channels switching (ON/OFF) actuator.

It has 2 auxiliary inputs which allow to control also by two wired conventional pushbuttons.

MOUNTING AND INSTALLATION

A. Mounting:

· Place the actuator with the antenna as faraway as possible from wires or metallic surfaces.

· Move away the actuator from attenuations or interferences, for example from metallic surfaces or other radio-frequency devices.

B. Installation:

Important: Switch off the power supply when installing.

B.1. - Wiring as 1-channel blinds/shutters actuator

To roll up or down a blind, follow the wiring diagram of Fig 1.

Allows the connection of 2 wired buttons (P1 and P2), which permit the possibility

of controlling the load with two wired pushbuttons.

B.2. - Wiring as 2-channels switching actuator

To control the switching ON and OFF of two diferent loads follow the wiring diagram

of Fig 2.

Allows the connection of 2 wired buttons (P1 and P2), which permit the possibility

of controlling the load with two wired pushbuttons.

18448

PE KNX 001

KNX-RF WIRELESS 1-CHANNEL BLINDS/SHUTTERS ACTUATOR OR 2-CHANNELS SWITCHING ACTUATOR

ACTUATORS - OUTPUTS

	18449	TM KNX 001	Wireless modular thermostat for air conditioning	RF
	Wireless modular thermostat that allows controlling the air conditioning system using wireless sensors: temperature sensor, door/windows contact or presence detector. It can be fixed a certain temperature and connect or disconnect the heater or the air conditioning according to different parameters: temperature measured by an external sensor, the opening or closing of door/window or the presence of people in the room. By default, after the commissioning is considered an ambient temperature of 25°C. Not receiving a different value from some associated temperature sensor, it will be considered at all times that initial temperature is maintained. DIN-rail mounting. It allows its installation in cabinets, out of the reach of unauthorized persons. Working mode selector switch for the setting-up and commissioning: - B: delete a link from the receiver channel. - P: link programming of the transmitter or receiver channel. - F: normal operation. - A: normal operation with repeater function. - R: delete all links from the transmitter and receiver channels. Compatible with ISO-IEC14543-2 KNX protocol. One object: CH_Room_Regulator_Type_0B 0x512h

18449

TM KNX 001

WIRELESS MODULAR THERMOSTAT FOR AIR CONDITIONING

	18450	RE KNX LE1	universal dimmer KNX-RF for the control of LED lamps, incandescent and halogen lamps	ACTUATORS - OUTPUTS
	· It is a wireless universal dimmer compatible with the KNX-RF protocol for the control of dimmable LED lamps, incandescent and halogen lamps. · Leading (L1) or Trailing (L2) edge dimming technology, depending on the position of the selector switch (C) and the load. · Protected against overloads and shortcircuits. · Control by any RF-KNX sensor: pushbutton, remote control... · Compatible with DINUY?s sensors: RC KNX 001, PU KNX 001 and EM KNX 002. · Possibility of control through wired pushbutton (D). · Incorporates the Momory functional (optional). CHARACTERISTICS Working mode selector switch for the setting-up and commissioning (A): - P: link programming. - R: standard operation with repeater function. - S: standard operation. - E: one link deletion from the receiver channel. - EA: all links deletion from the receiver and transmitter channels. Load type selector switch (C). It has 2 functions: - 1º. Select the load type: · L1: 230V~ LED lamps and 12V~ halogen lamps with ferromagnetic transformer. · L2: 12V~ LED lamps with electronic transformer, Incandescent & Halogen lamps and 12V~ Halogen lamps with electronic transformer. - 2º. Select the minimum lighting level (- +). It is useful with LED lamps. It avoids undesirable effects (e.g.: blinks) when the LED lamps are dimmed at low level. It has a Programming key (A) for linking other RF devices. It is possible to wire an auxiliary pushbutton (D) for the local control of the load: switch on/off and dimming. Lighting pushbuttons are not alowed. Two RF channels: output channel (wired pushbutton) and input channel (of the dimmer)

18450

RE KNX LE1

UNIVERSAL DIMMER KNX-RF FOR THE CONTROL OF LED LAMPS, INCANDESCENT AND HALOGEN LAMPS

ACTUATORS - OUTPUTS

	18451	RE KNX LE3	CHANNEL LED STRIP WIRELESS DIMMER	ACTUATORS - OUTPUTS
	It is a wireless dimmer compatible with the RF-KNX protocol for the control of 12~48VDC onecolour LED strips, up to 4A. · Supports the following telegrams: On, Off, Timed On, Scene, Relative Dimming and Absolute Dimming. · Pulse Width Modulation dimming technology (PWM). · Control by any RF-KNX sensor: pushbutton, remote control,... · Compatible with DINUY?s sensors: RC KNX 001, PU KNX 001 y EM KNX 002. CHARACTERISTICS Working mode selector switch for the setting-up and commissioning (A): - P: link programming. - R: standard operation with repeater function. - F: standard operation. - E: one link deletion from the receiver channel. - EA: all links deletion from the receiver and transmitter channels. With or without Memory working modes (B). It has a Programming key (C) for linking other RF devices. INSTALLATION Install the actuator according to the shown wiring diagram.

18451

RE KNX LE3

CHANNEL LED STRIP WIRELESS DIMMER

ACTUATORS - OUTPUTS

	18452	RE KNX RGB	a wireless 3 channel dimmer compatible with the RF-KNX protocol for the control of 12~48V	ACTUATORS - OUTPUTS
	· It is a wireless dimmer compatible with the RF-KNX protocol for the control of 12~48VDC RGB LED strips, up to 5A per channel. · Pulse Width Modulation dimming technology (PWM). · It has 3 output physical channels (R, G and B) and 4 working channels (R + G + B). The fourth channel allows to control the 3 RGB channels at the same time. · It has a control knob (B) which allows selecting the desired working mode. · A second control knob (A) allows to select the channel to be linked or deleted at the time of commissioning: - 1: Channel R. - 2: Channel G. - 3: Channel B. - 4: Channel R+G+B. · Control by any RF-KNX sensor: pushbutton, remote control,... · Compatible with DINUY?s sensors: RC KNX 001, PU KNX 001 y EM KNX 002

18452

RE KNX RGB

A WIRELESS 3 CHANNEL DIMMER COMPATIBLE WITH THE RF-KNX PROTOCOL FOR THE CONTROL OF 12~48V

ACTUATORS - OUTPUTS

	18454	RE KNX 010	Wireless controller, compatible with KNX-RF protocol, for control of luminaires, fluorescence or LED, with reactance or driver adjustable by signal 1 / 10Vcc.	ACTUATORS - OUTPUTS
	• Wireless controller, compatible with KNX-RF protocol, for control of luminaires, fluorescence or LED, with reactance or driver adjustable by signal 1 / 10Vcc. • Control via wireless RF transmitter and / or conventional wired pushbutton: short presses on / off, maintained pulses regulate. • Memory function • Recessed mounting in registration box • Incorporates relay output for the physical disconnection of luminaires. • Possibility of adjusting the speed of regulation by potentiometer

18454

RE KNX 010

WIRELESS CONTROLLER, COMPATIBLE WITH KNX-RF PROTOCOL, FOR CONTROL OF LUMINAIRES, FLUORESCENCE OR LED, WITH REACTANCE OR DRIVER ADJUSTABLE BY SIGNAL 1 / 10VCC.

ACTUATORS - OUTPUTS

	18895	CO KNT 002	USB / KNX-PT communication interface	SYSTEM DEVICES
	• It allows establishing a bidirectional connection between a PC and the bus of the KNX installation • The USB connector has a galvanic separation of the KNX bus • This interface is compatible with ETS 3 or later.

18895

CO KNT 002

USB / KNX-PT COMMUNICATION INTERFACE

SYSTEM DEVICES

	19028	PU KNT 001	Laüka Capacitive push buttons Black glass + illuminated frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19028

PU KNT 001

LAÜKA CAPACITIVE PUSH BUTTONS BLACK GLASS + ILLUMINATED FRAME

PUSH BUTTONS

	19029	PU KNT 002	Black glass + copper frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19029

PU KNT 002

BLACK GLASS + COPPER FRAME

PUSH BUTTONS

	19030	PU KNT 003	Black glass + chrome frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19030

PU KNT 003

BLACK GLASS + CHROME FRAME

PUSH BUTTONS

	19036	PU KNT 004	Black glass + bronze frame	SIN FAMILIA
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19036

PU KNT 004

BLACK GLASS + BRONZE FRAME

SIN FAMILIA

	19037	PU KNT 005	Black glass + WOOD frame	SIN FAMILIA
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19037

PU KNT 005

BLACK GLASS + WOOD FRAME

SIN FAMILIA

	19038	PU KNT 006	Laüka Capacitive push buttons White glass + illuminated frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19038

PU KNT 006

LAÜKA CAPACITIVE PUSH BUTTONS WHITE GLASS + ILLUMINATED FRAME

PUSH BUTTONS

	19039	PU KNT 007	Laüka Capacitive push buttons White glass + copper frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19039

PU KNT 007

LAÜKA CAPACITIVE PUSH BUTTONS WHITE GLASS + COPPER FRAME

PUSH BUTTONS

	19040	PU KNT 008	Laüka Capacitive push buttons White glass + chrome frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19040

PU KNT 008

LAÜKA CAPACITIVE PUSH BUTTONS WHITE GLASS + CHROME FRAME

PUSH BUTTONS

	19041	PU KNT 009	Laüka Capacitive push buttons White glass + bronze frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19041

PU KNT 009

LAÜKA CAPACITIVE PUSH BUTTONS WHITE GLASS + BRONZE FRAME

PUSH BUTTONS

	19042	PU KNT 010	Laüka Capacitive push buttons White glass + wooden frame	PUSH BUTTONS
	LAÜKA The Laüka range consists of a series of KNX push buttons capacitive multi-function. It consists of a mechanism designed to provide the user absolute control over lighting, blinds and, in turn, the Scene management. Incorporates thermostat function and configurable temperature senspr via ETS. Its design and RGB lighting bring modernity and innovation to the stay.

19042

PU KNT 010

LAÜKA CAPACITIVE PUSH BUTTONS WHITE GLASS + WOODEN FRAME

PUSH BUTTONS

	16253	ST KNT 001	Temperature probe for EM KNT-002	SENSORS
	ST KNT 001: • NTC temperature probe for EM KNT 002 sensor. • Probe length: 3 meters.

16253

ST KNT 001

TEMPERATURE PROBE FOR EM KNT-002

SENSORS

	16428	EM KNX 002	1-CHANNEL WIRELESS TRANSMITTER FOR PUSHBUTTON	RF
	• 1-channel transmitter for Pushbutton • Functions: ON/OFF, dimming, save/recover 2 scenes or blinds/shutters control • Universal mechanism box flush mounting • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16428

EM KNX 002

1-CHANNEL WIRELESS TRANSMITTER FOR PUSHBUTTON

	16429	PU KNX 001	PORTABLE 1-CHANNEL WIRELESS PUSHBUTTON	RF
	• 1-channel portable pushbutton • Functions: ON/OFF, dimming or save/recover 1 scene • Installation: surface mounting or portable • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16429

PU KNX 001

PORTABLE 1-CHANNEL WIRELESS PUSHBUTTON

	16430	RC KNX 001	5-CHANNELS REMOTE CONTROL	RF
	• 5-channels remote control • Function: ON/OFF/Dimming the lighting, move up/dpwn blinds or shutters, save/recover 5 scenes • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16430

RC KNX 001

5-CHANNELS REMOTE CONTROL

	16431	AM KNX 001	RF SIGNALS REPEATER	RF
	• RF signals repeater • Function: repeat wireless signals in order to reach longer ranges • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16431

AM KNX 001

RF SIGNALS REPEATER

	16432	SE KNX 001	WIRELESS TEMPERATURE SENSOR	SIN FAMILIA
	• Temperature sensor • Function: sends the temperature of the room periodically • Installation: surface mounting • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16432

SE KNX 001

WIRELESS TEMPERATURE SENSOR

SIN FAMILIA

	16433	SE KNX 002	WIRELESS BRIGHTNESS SENSOR	RF
	• Brightness sensor • Function: solar protection • Installation: glued on the window • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16433

SE KNX 002

WIRELESS BRIGHTNESS SENSOR

	16434	SE KNX 003	WIRELESS DOORS/WINDOWS CONTACT	RF
	• Door/window contact sensor • Function: detects if the door or window is openned and sends the respective telegram • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16434

SE KNX 003

WIRELESS DOORS/WINDOWS CONTACT

	16435	SE KNX 004	WIRELESS TEMPERATURE SENSOR & THERMOSTAT	RF
	• Temperature sensor with temperature setting • Function: sends the ON or OFF telegram depending on the temperatura of the room and the set one • Installation: surface mounting • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16435

SE KNX 004

WIRELESS TEMPERATURE SENSOR & THERMOSTAT

	16442	SE KNX 005	WIRELES TEMPERATURE SENSOR WITH PROBE	RF
	• Temperature sensor with Probe • Function: sends the temperature measured by the probe • power supply: 230V~ • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16442

SE KNX 005

WIRELES TEMPERATURE SENSOR WITH PROBE

	16443	DM KNX 001	FLUSH-CEILING MOUNTING MOTION DETECTOR	RF
	• Flush-ceiling mounted IR motion detector • Function: as soon as it detects movement it sends an ON signal to the linked actuator and keeps its contact closed for the time set on the actuator. With each detection the sensor sends the telegram to the actuator and restart the delay time • Coverage: Ø6m at 2.4m high • Mounting: flush-ceiling • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16443

DM KNX 001

FLUSH-CEILING MOUNTING MOTION DETECTOR

	16444	DM KNX 002	SURFACE-MOUNTING MOTION DETECTOR	RF
	• Surface mounted IR motion detector • Function: as soon as it detects movement it sends an ON signal to the linked actuator and keeps its contact closed for the time set on the actuator. With each detection the sensor sends the telegram to the actuator and restart the delay time • Coverage: 180º and 10m • Mounting: wall or ceiling • Power supply: battery-operated • Radio-frequency: 868,4MHz • Range: 100m (in the free field)

16444

DM KNX 002

SURFACE-MOUNTING MOTION DETECTOR

	16929	ST KNT 002	Temperature probe, Epoxi black, 0.5m	SENSORS
	• Sondas de Temperatura Epoxy NTC para el sensor de 4 entradas binarias/analógicas EM KNT 002. • Medición por contacto o del aire que le rodea. • Gran precisión y estabilidad sobre un amplio rango de temperatura. • Se incluye un cable de 3m (ST KNT 001) o de 0,5m (ST KNT 002) de longitud.

16929

ST KNT 002

TEMPERATURE PROBE, EPOXI BLACK, 0.5M

SENSORS

	19782	RE KNX DA1	Wireless Controller for DALI Equipment - RE KNX DA1	ACTUATORS - OUTPUTS
	Wireless controller compatible with the KNX-RF portocolo, in pellet format for the control of luminaires, fluorescence or LED, with reactance or driver adjustable by DALI signal Control via RF wireless transmitter and / or conventional pushbuttons: short presses on / off and controlled pulsations regulate Memory function Recessed mounting in register box Unidirectional communication and broadcasting (a single group). Does not allow the individual addressing of luminaires Possibility of adjusting the regulation speed by potentiometer

19782

RE KNX DA1

WIRELESS CONTROLLER FOR DALI EQUIPMENT - RE KNX DA1

ACTUATORS - OUTPUTS

	19844	RE KNT 004	Regulator (Dimmer) R, C and LEDs universal 4 channels / 250W per channel	ACTUATORS - OUTPUTS
	Valid universal actuators for LED lamps, incandescence, Halogen and CFL's. Regulation technology by beginning or end of phase. They have 1 (RE KNT 000) or 4 (RE KNT 004) output channels. They incorporate protection against overload, short-circuit and over-temperature. Soft start to increase the life of the lamps. Modular format (5 width modules), DIN rail installation. They have a potentiometer for manual control, without the need for the Bus, that allows to check the perfect operation of the regulator with the lamps. Anti-panic input for security systems. Programming and start-up using ETS4, or later versions. Valid for different types of lamps: - Adjustable 230V LED lamps. - Adjustable 12V LED lamps (with electronic transfo). - Adjustable Fluo-compact lamps. - Incandescence and Halogen 230V. - Halogen MBT with electronic transformer (non-ferromagnetic)

19844

RE KNT 004

REGULATOR (DIMMER) R, C AND LEDS UNIVERSAL 4 CHANNELS / 250W PER CHANNEL

ACTUATORS - OUTPUTS

	España
	Deutschland
	Middle East
	South Africa
	China
	-------------------
	Other countries