KNX - DAIKIN AC. SKY Air and VRV systems with 4 binary inputs

IntesisBox DK-RC-KNX-1i allows monitoring and control, fully bi-directionally, all the functioning parameters of Daikin SKY Air and VRV Air Conditioners from KNX installations. Moreover, four potential-free binary inputs provide the possibility to integrate many types of external devices.

• Reduced dimensions, quick installation.
• Direct connection to the P1/P2 bus, the bus that connects the AC indoor unit and the wired remote controller.
• Multiple objects for control and status (bit, byte, characters…) with KNX standard datapoint types.
• Status objects for every control available.
• Special Modes available (Power, Economy, Additional Heating and Additional Cooling).
• Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based on the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• AC unit can be controlled simultaneously by the remote controller of the AC unit and by KNX.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock at any moment by using a simple switching.
• Four potential-free binary inputs provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more.

PA-AC-KNX-1i allows a complete and natural integration of PANASONIC air conditioners with KNX control systems.

Compatible with all Etherea models commercialized by PANASONIC.

Main features:

• Reduced dimensions, quick installation.
• Multiple objects for control and status (bit, byte, characters… with KNX standard datapoint types.
• Status objects for every control available. Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based in the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AC unit can be controlled simultaneously by the IR remote control of the AC unit and by KNX.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock in any moment by using a simple switching.
•  Four potential-free binary inputs provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more

• Conexión directa al bus EIB.
• Conexión directa al bus RS485 de LG.
• Configuración simple usando el software LinkBoxEIB que se entrega junto con IntesisBox sin
coste adicional.
• Integre 1 Aire Acondicionado LG en sus proyectos KNX

• Cuatro modelos disponibles:
o Ref. LG-AC-KNX-4, con capacidad de hasta 4 unidades interiores.
o Ref. LG-AC-KNX-8, con capacidad de hasta 8 unidades interiores.
o Ref. LG-AC-KNX-16, con capacidad de hasta 16 unidades interiores.
o Ref. LG-AC-KNX-64, con capacidad de hasta 64 unidades interiores

DK-AC-KNX-1i allows a complete and natural integration of Daikin air conditioners with KNX control systems.

Compatible with all Domestic models commercialized by Daikin.

Main features:

• Reduced dimensions, quick installation.
• Multiple objects for control and status (bit, byte, characters… with KNX standard datapoint types.
• Status objects for every control available.
• Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based in the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AC unit can be controlled simultaneously by the IR remote control of the AC unit and by KNX.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock in any moment by using a simple switching.
• Four potential-free binary inputs provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more

PA-AC-KNX-1i allows a complete and natural integration of PANASONIC air conditioners with KNX control systems.

Compatible with FS and FSM models commercialized by PANASONIC.

Main features:

• Reduced dimensions, quick installation.
• Multiple objects for control and status (bit, byte, characters… with KNX standard datapoint types.
• Status objects for every control available. Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based in the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AC unit can be controlled simultaneously by the IR remote control of the AC unit and by KNX.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock in any moment by using a simple switching.
•  Four potential-free binary inputs provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more

• Direct connection to KNX TP-1 (EIB) bus.

• Direct connection to MHI indoor unit’s Superlink network connector.

• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox® with no additional cost.

• Integrates MHI Air Conditioners in your KNX projects.

• Two models available:

o Ref. MH-AC-KNX-48, supporting up to 48 indoor units.

o Ref. MH-AC-KNX-128, supporting up to 128 indoor units.

• Direct connection to KNX TP-1 (EIB) bus.

• Direct connection to MHI indoor unit’s Superlink network connector.

• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox® with no additional cost.

• Integrates MHI Air Conditioners in your KNX projects.

• Two models available:

o Ref. MH-AC-KNX-48, supporting up to 48 indoor units.

o Ref. MH-AC-KNX-128, supporting up to 128 indoor units.

IntesisBox® MH-RC-KNX-1i gateway allows monitoring and bidirectional control of all the parameters and functionality of Mitsubishi Heavy Industries air conditioners from KNX installations. Compatible with FD, KX6 and KXR6 Series manufactured by Mitsubishi Heavy Industries. 4 free-use binary inputs.

• Direct connection to KNX TP-1 (EIB) bus.
• Direct connection to Arçelik outdoor unit’s EIA485 bus.
• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox with no additional cost.
• Integrates1 Arçelik Air Conditioners in your KNX projects.
• Four models available:

1. Ref. AK-AC-KNX-4, with capacity of up to 4 indoor units.
2. Ref. AK-AC-KNX-8, with capacity of up to 8 indoor units.
3. Ref. AK-AC-KNX-16, with capacity of up to 16 indoor units.
4. Ref. AK-AC-KNX-64, with capacity of up to 64 indoor units.

• Direct connection to KNX TP-1 (EIB) bus.
• Direct connection to Arçelik outdoor unit’s EIA485 bus.
• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox with no additional cost.
• Integrates1 Arçelik Air Conditioners in your KNX projects.
• Four models available:

1. Ref. AK-AC-KNX-4, with capacity of up to 4 indoor units.
2. Ref. AK-AC-KNX-8, with capacity of up to 8 indoor units.
3. Ref. AK-AC-KNX-16, with capacity of up to 16 indoor units.
4. Ref. AK-AC-KNX-64, with capacity of up to 64 indoor units.

• Direct connection to KNX TP-1 (EIB) bus.
• Direct connection to Arçelik outdoor unit’s EIA485 bus.
• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox with no additional cost.
• Integrates1 Arçelik Air Conditioners in your KNX projects.
• Four models available:

1. Ref. AK-AC-KNX-4, with capacity of up to 4 indoor units.
2. Ref. AK-AC-KNX-8, with capacity of up to 8 indoor units.
3. Ref. AK-AC-KNX-16, with capacity of up to 16 indoor units.
4. Ref. AK-AC-KNX-64, with capacity of up to 64 indoor units.

• Direct connection to KNX TP-1 (EIB) bus.
• Direct connection to Arçelik outdoor unit’s EIA485 bus.
• Simple configuration using the software LinkBoxEIB supplied with the purchase of IntesisBox with no additional cost.
• Integrates1 Arçelik Air Conditioners in your KNX projects.
• Four models available:

1. Ref. AK-AC-KNX-4, with capacity of up to 4 indoor units.
2. Ref. AK-AC-KNX-8, with capacity of up to 8 indoor units.
3. Ref. AK-AC-KNX-16, with capacity of up to 16 indoor units.
4. Ref. AK-AC-KNX-64, with capacity of up to 64 indoor units.

FJ-RC-KNX-1i allows a complete and natural integration of the air units
Fujitsu conditioning in KNX control systems.
Simple installation It can be installed inside the AC unit itself, connecting a
end directly with the Fujitsu bus and the other side directly with the KNX TP-1 bus
(EIB)
Great flexibility and integration in your KNX projects. The configuration is done directly
from ETS. The device database comes with a complete set of objects from
communication, allowing from a simple and rapid integration, using objects of
basic communication, up to an advanced integration through control parameters and
monitoring of all the parameters of the air conditioning unit. They are also
Other specific communication objects are available, such as saving and executing scenes.
Four binary inputs with potential-free contacts provide the possibility of
integrate multiple devices. Also configurable from ETS, they can be used as
switches, dimmings, control of blinds and many more.
It allows the use of a KNX temperature sensor for air conditioning control.
IntesisBox ® FJ-RC-KNX-1i offers complete integration of your air unit
conditioning in your KNX project for a very affordable price.

PA-RC2-KNX-1i allows a complete and natural integration of PANASONIC air conditioners with KNX control systems.

Compatible with EDOi, PACi and ECOg Series air conditioners commercialized by Panasonic and Sanyo.

Main features:

• Reduced dimensions, quick installation.
• Multiple objetcs for control and status (bit, byte, characters...) with KNX standard datapoint types.
• Status objects for every control available.
• Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based in the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AC unit can be controlled simultaneously by the wired remote control of the AC unit and by KNX.
• Total control and Monitoring of the AC unit from KNX, including monitoring of AC unit´s state of internal variables, running hours counters (for filter maintenance control), and error indication and error code.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, set temperature, fan speed, vane position and remote controller lock in any moment by using a simple switching.
• Four binary inputs for potential-free contacts provide the possibility to integrate many types of external devices. Also configurable from ETS, the can used for switching, dimming, shutter/blind control, and more.

TO-RC-KNX-1i allows a complete and natural integration of TOSHIBA air conditioners with KNX  control systems.

Compatible with Digital Inverte & VRF Series air conditiones commercialized by Toshiba.

Main features;

• Reduced dimensions, quick installation.
• Multiple object for control and status (bit,byte, characters...) with KNX standard datapoint types.
• Status objects for every control available.
• Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based in the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AD unit can be controlled simultaneously by the wired remote control of the AC unit and by KNX.

The LG-RD-MBS-1 interface allows a complete and natural integration of LG air conditioning units into Modbus RTU (EIA485) networks.

• Reduced dimensions. 93 x 53 x 58 mm
• Quick and easy installation
• External power not required
• Direct connection to Modbus RTU networks. Up to 63 LG-RC-MBS-1 devices can be connected in the same network.
• Direct connection to the AC indoor units.
• Configuration from both on-board DIP-switches and Modbus RTU.
• Total Control and Supervision
• Real states of the AC unit´s internal variables.
• Allows using simultaneously the IR and wired remote controls and Modbus RTU.

Control and supervision of Toshiba VRF AC units from KNX. Central control of 16 or 64 units from a single gateway.

Direct connection to KNX TP-1 (EIB) bus.

Direct connection to Toshiba indoor unit´s TCC-Link connector.

Configuration is made directly from ETS. The database of the device comes with a complete set of communication objects allowing, from a simple and quick integration using the basic objects, to the most advanced integration with monitoring and control of all the AC unit´s parameters.

Control and supervision of Toshiba VRF AC units from KNX. Central control of 16 or 64 units from a single gateway.

Direct connection to KNX TP-1 (EIB) bus.

Direct connection to Toshiba indoor unit´s TCC-Link connector.

Configuration is made directly from ETS. The database of the device comes with a complete set of communication objects allowing, from a simple and quick integration using the basic objects, to the most advanced integration with monitoring and control of all the AC unit´s parameters.

The aim of this integration is to make accessible KNX Data points from a BACnet/IP or BACnet MSTP. The BACnet gateway allows other BACnet devices in the network to perform subscription (COV) requests and, also read and write its internal points.

From the KNX system point of view, in the startup process of the gateway and, also after a detection of a KNX bus reset, the gateway polls the KNX signals configured to be updated in this situation and maintain the received values in memory to be served to the BACnet system when requested. Also, listen for any KNX telegram related to the internal points configured in it and acts accordingly to the configuration of the related point.

From the BACnet system point of view, after the startup process, the gateway listens for any subscription (COV) request, serves any polling request or performs any writing request of its internal points received from BACnet system. The values received from BACnet become available to be read (and when applicable, written) by the KNX system and vice-versa.

Configuration is carried out using the configuration software IntesisBox® MAPS.

IntesisBox IS-IR-KNX-1i allows monitoring and control, of your Air Conditioner from KNX installations through the standard IR receiver.

IntesisBox HI-RC-MBS-1 allows monitoring and control, fully bi-directionally, all the functioning parameters of Hitachi VRF Air Conditioners into Modbus RTU (RS-485) networks.

MAIN FEATURES:

Reduced dimensions: 93 x 53 x 58 mm.

Quick and easy installation.

Mountable on DIN rail, wall, or even inside the indoor unit in some models of AC.  

External power not required.

Direct connection to MODBUS RTU (RS-485) networks. Up to 63 HI-RC-MBS-1 devices can be connected to the same network.

 HI-RC-MBS-1 is a Modbus slave device.

Direct connection to the AC indoor unit.

Configuration from both on-board DIP-switches and MODBUS RTU.

Total Control and Supervision.

Real states of the AC unit's internal variables.

Allows using simultaneously the IR and wired remote controls and MODBUS RTU.

• IntesisBox PA-AW2-KNX-1 allows fully bi-directional communication with PANASONIC Aquarea H Air to Water systems from KNX installations

• Reduced dimensions.
• Easy and fast installation.
• External power not required.
• Direct connection to the Hydro unit.
• Multiple control and status objects (bit, byte, characters…) with standard KNX datapoints.
• One status object available for each control object.
• Total control and supervision of the 2 zones available in Aquarea H.

IntesisBox HI-RC-KNX-1i allows monitoring and control, fully bi-directionally, all the functioning parameters of HITACHI Commercial Lines (PAC, VRF) Air Conditioners from KNX installations. Moreover, four potential-free binary inputs provide the possibility to integrate many types of external devices.

• Reduced dimensions and quick installation.
• Multiple objects for control and status (bit, byte, characters…) with KNX standard datapoint types.
• Status objects for every control available.
• Timeout for Open Window and Occupancy. Sleep function also available.
• Control of the AC unit based on the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• AC unit can be controlled simultaneously by the wired remote control of the AC unit and by KNX.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• Up to 5 scenes can be saved and executed from KNX, fixing the desired combination of Operation Mode, Set Temperature, Fan Speed, Vane Position and Remote Controller Lock at any moment by using a simple switching.
• Four binary inputs for potential-free contacts provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more.

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of KNX installations from a Modbus BMS, SCADA, PLC or any other device working as a Modbus Master.

• IBMBSKNX1000000  (100 points)
• IBMBSKNX2500000  (250 points)
• IBMBSKNX6000000  (600 points)
• IBMBSKNX1K20000 (1200 points)
• IBMBSKNX3K00000 (3000 points)

DESCRIPTION:

From the KNX system point of view, in the start-up process of the gateway and also after a detection of a KNX bus reset, the gateway polls the KNX signals configured to be updated in this situation and maintain the received values in memory to be served to the Modbus system when requested. Also, listen for any KNX telegram related to the internal points configured in it and acts accordingly to the configuration of the related point.

From the Modbus system point of view, after the start-up process, the gateway listen for any read or write request, and serves any read request or performs any writing request of its internal points received from Modbus system. The values received from Modbus become available to be read by the KNX system and vice-versa.

NOTE: In case you need documentation for the previous gateway version, please check the following link:
https://www.intesisbox.com/en/knx-modbus-server-ibox-mbs-knx-discontinued/gateway/

The IntesisBox Gatewya has been designed to monitor and control your Notifier ID3000 and ID3002 fire panels remotely from your Control Center using any commercial SCADA or monitoring software with Modbus TCP driver.

The aim of this integration is to make available points states of Notifier ID3000 series fire panels from a Modbus master device device. For this, IntesisBox Modbus Server - Notifier ID3000 gateway works, from the Modbus system point of view, acting as a Modbus slave device responding to data polls coming from the Modbus master, and from the Notifier system point of view, acting as a serial device connected to its RS232 port, and serving the data received from Notifier to the Modbus side.

IntesisBox connects to the RS232 port of the Notifier panel, either through the RS232 port of the mother board, or through the isolated ISO-RS232 port (optional card), this last is the recommended and the use of a baud rate of 2400bps.

If there is more than one Notifier fire panel connected in network, any of them can be integrated using the IntesisBox, but only one panel. IntesisBox can be physically connected to one panel but communicating with another panel connected to the Notifier network.

IntesisBox MH-RC-MBS-1 allows monitoring and control, fully bi-directionally, all the functioning parameters of Mitsubishi Heavy Industries FD and KX6 (VRV) Air Conditioners into Modbus RTU (RS-485) networks.

• Reduced dimensions. 93 x 53 x 58 mm.

• Quick and easy installation.
Mountable on DIN rail, wall, or even inside the indoor unit in some models of AC.  

• External power not required.

• Direct connection to MODBUS RTU (RS-485) networks. Up to 63 MH-RC-MBS-1 devices can be connected in the same network.
 MH-RC-MBS-1 is a Modbus slave device.

• Direct connection to the AC indoor units. Up to 16 AC indoor units can be connected to MH-RC-MBS-1, controlling them as one (not individually).

• Configuration from both on-board DIP-switches and MODBUS RTU.

• Total Control and Supervision.

• Real states of the AC unit's internal variables.

DESCRIPTION:

The aim of this integration is to monitor and control your LG Air Conditioning system, remotely, from your Control Center using any commercial SCADA or monitoring software that includes the possibility to communicate through simple ASCII messages on a TCP/IP network.
IntesisBox LG-RC-WMP-1 makes available the LG Air Conditioning system indoor units through independent registers and connects to the TCP/IP network thanks to its wifi interface.

Control the AC unit easily with simple ASCII messages and the LG-RC-WMP-1 InteisBox interface.

AVAILABLE DRIVERS FOR INTESISBOX WIFI SERIES:

If you would like to use the IntesisBox WiFi series with any of the Home Systems below, notice that you can use one of the available drivers instead of making the driver by yourself from scratch. 

If you have already developed a driver for any other Home System not listed below, do not hesitate to contact us so we can publish it on our site and share it with our integrators community.

Click on the links to get direct access to the driver’s download page:

 - IntesisBox - ELAN

 - IntesisBox – Control 4  

 - IntesisBox – Crestron  

 - IntesisBox - Iridium

 - IntesisBox - AMX

INSTALLATION TUTORIAL:

IntesisBox WMP WiFi Configuration (video)

Wi-Fi - DAIKIN AC. SKY Air and VRV systems

IntesisBox DK-RC-WMP-1 allows a complete and natural integration of Daikin air conditioners into IP based control systems. Compatible with SKY Air and VRV Air Conditioners commercialized by Daikin.

INSTALLATION TUTORIAL:

IntesisBox WMP WiFi Configuration (video)

Drivers:

 - IntesisBox - ELAN

 - IntesisBox – Control 4  

 - IntesisBox – Crestron  

 - IntesisBox - Iridium

 - IntesisBox - AMX

Modbus Server - MITSUBISHI ELECTRIC AC (RAC, PAC, VRF) 50 Groups. City Multi with AG-150A, G-50A, GB-50A or
GB-50ADA, AE-200, EW-50

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC or any other device working as a Modbus Master.

Modbus Server - MITSUBISHI ELECTRIC AC (RAC, PAC, VRF) 50 Groups. City Multi with AG-150A, G-50A, GB-50A or
GB-50ADA, AE-200, EW-50

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC or any other device working as a Modbus Master.

IBMBSMEB0200000  (500 points and 20 devices)

Integration of data coming from M-Bus meters into a Modbus master device or system, using IntesisBox Modbus Server - M-Bus gateway.

Our gateway includes an internal Level Converter so no extra hardware is required.

The aim of this integration is to make available signals and resources of meters connected to M-Bus, from a Modbus master device or system. For this IntesisBox Modbus Server - M-Bus gateway works, from the Modbus system point of view, acting as a Modbus slave device responding to data polls coming from the Modbus master, and from the M-Bus system point of view acting as an M-Bus master device polling data to the meters, and serving this data to the Modbus side.

NOTE: In case you need documentation for the previous gateway version, please check the following link:

https://www.intesisbox.com/en/mbus-modbus-server-ibox-mbs-mbus-discontinued/gateway/

IBOX-MBS-DALI IBMBSDAL0640000

 Modbus Server TCP & RTU - DALI (64 devices, 1 channel)

• Providing a DALI physical channel with the necessary bus voltage (about 15V) and current regulation (max. 250mA).
• Setting the proper configuration values of the DALI ballasts (addresses, groups, max/min levels…).
• Performing control and monitoring of the DALI ballasts in the DALI bus from a Modbus-based control system, so that the ballasts become part of the own Modbus system.
• Support for DALI multi-master

Once set up, the gateway acts as a Modbus Server (slave) device in its Modbus interface, allowing other Modbus client (master) devices reading or writing its internal Modbus registers. These registers provide control of the DALI ballasts connected to IntesisBox.

NOTE: In case you need documentation for the previous gateway version, please check the following link:

https://www.intesisbox.com/en/dali-modbus-server-ibox-mbs-dali-discontinued/gateway/

• HA-AC-KNX-8 (for 8 indoor units)
• HA-AC-KNX-16 (for 16 indoor units)
• HA-AC-KNX-64 (for 64 indoor units)

The IntesisBox Gateway has been specially designed to allow bi-directional control and monitoring of Haier VRF and commercial lines solutions from a KNX installation.

DESCRIPTION:

• Reduced dimensions. Installation even inside the A.C. indoor unit.
• Quick and nonvisible installation.
• External power not required.
• Direct connection to the KNX EIB bus.
• Direct connection to the Haier Communication Adaptor.
  • HA-MA164AD
  • HA-MB164AD
  • HA-MC164AD
• Fully KNX interoperable, configuration from ETS.
• Multiple objects for control (of different types: bit, byte, characters…).
• Control of the AC unit based on the ambient temperature read by the own AC unit, or in the ambient temperature read by any KNX thermostat.
• Total Control and Monitoring of the AC unit from KNX, including monitoring of AC unit’s state of internal variables, running hours counter (for filter maintenance control), and error indication and error code.
• AC unit can be controlled simultaneously by the IR remote control of the AC unit and by KNX.

IntesisBox PA-AW2-MBS-1 allows fully bi-directional communication with PANASONIC Aquearea H Air-to-Water systems. Control and monitor all the functions and parameters of the system from Modbus RTU (RS-485) networks. 

• Reduced dimensions: 93 x 53 x 58 mm.
• Quick and easy installation. Mountable on DIN rail, wall.
• External power not required.
• Direct connection to Modbus RTU (EIA485) networks. Up to 63 PA-AW2-MBS-1 devices can be connected to the same network.
• PA-AW2-MBS-1 is a Modbus slave device.
• Direct connection to the Hydro unit.
• The cable for this connection is also supplied.
• Configuration from both onboard DIP-switches and Modbus RTU.
• Total control and supervision of the 2 zones available in Aquarea H.
• Real states of the AW unit's internal variables.
• Allows using simultaneously the remote control and Modbus RTU.

DESCRIPTION:
The aim of this integration is to make accessible signals and resources of any BACnet/IP based system from a system capable of "talking" Modbus protocol.

IntesisBox allows integrating devices "talking" BACnet/IP, into a supervision/control/automation system "talking" Modbus (PLC, SCADA, Controller…), and in general into any device or system with a Modbus master (TCP or RTU) interface.

For this, IntesisBox acts as a BACnet/IP Client device in its BACnet interface, reading/writing points of other BACnet/IP device(s), and offering these point's values of other BACnet device(s) through its Modbus interface. The readings into the BACnet device(s) performed by IntesisBox can be by continuous polling or by subscription request (COV), configurable.

The aim of this integration is to monitor and control your Hitachi Air Conditioning system, remotely, from your Control Center using any commercial SCADA or monitoring software that includes a BACnet/IP driver. To do it so, IntesisBox allows BACnet/IP communication, acting as a server, allowing polling or subscription requests (COV).

IntesisBox makes available the Hitachi air conditioning system indoor units through independent BACnet objects.

Abstraction of Hitachi air conditioning system properties and functionalities as fixed BACnet Objects. IntesisBox allows fixed BACnet object IDs mapping. Simple configuration is needed: just select the appropriate communication parameters (IP address, baud rate…).

IntesisBox connects to the Hitachi HC-A8MB or HC-A64MB communication adaptors.