Order by:   Filter results: 
Web Code Reference Description Category Price
17171 ITR504-16A-01 4 Channel Knx Combo Switch Actuator, 16A, 6U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17171
ITR504-16A-01 4 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 6U ACTUATORS - OUTPUTS
17172 ITR508-16A-02 8 Channel Knx Combo Switch Actuator, 16A, 6U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17172
ITR508-16A-02 8 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 6U ACTUATORS - OUTPUTS
17173 ITR512-16A-02 12 Channel Knx Combo Switch Actuator, 16A, 10U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17173
ITR512-16A-02 12 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 10U ACTUATORS - OUTPUTS
17174 ITR516-16A-01 16 Channel Knx Combo Switch Actuator, 16A, 10U ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17174
ITR516-16A-01 16 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, 10U ACTUATORS - OUTPUTS
17175 ITR520-16A-01 20 Channel Knx Combo Switch Actuator, 16A, ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17175
ITR520-16A-01 20 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, ACTUATORS - OUTPUTS
17176 ITR524-16A-01 24 Channel Knx Combo Switch Actuator, 16A, ACTUATORS - OUTPUTS

The combo actuator is a KNX certified device available with 4, 8, 12, 16, 20 and 24 channels.

Modules are supplied over KNX bus and do not need any other external power supply.

The communication of the devices via the KNX bus enables information exchanges with KNX sensors and the integration with a building management system.

Outputs of combo module can be configured to different functionalities depending on the project needs, therefore supports many combinations.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Lighting.
- Heating.
- Shutter and Blind.
- Shutter and Blind 24V.
- Fan Coil 2 pipes.
- Fan Coil 4 pipes.

The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.

Last situation memory against power failure.

17176
ITR524-16A-01 24 CHANNEL KNX COMBO SWITCH ACTUATOR, 16A, ACTUATORS - OUTPUTS
17178 ITR102 2 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17178
ITR102 2 GANG PUSH BUTTON INTERFACE INPUTS
17179 ITR104 4 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17179
ITR104 4 GANG PUSH BUTTON INTERFACE INPUTS
17180 ITR106 6 gang push button interface INPUTS

The binary input module is a KNX certified device available with 2, 4 and 6 inputs.

CONFIGURATION
The complete configuration of the device is performed via ETS3 or higher.
Depending on the ETS configuration and settings the product feature will be different.

FUNCTIONS
- Switching commands
- Toggle commands
- Dimming
- Blind Control
- Value selected
- 2 Channel Mode

17180
ITR106 6 GANG PUSH BUTTON INTERFACE INPUTS
17304 ITR-110-0104 Interra 10.1'' Touch Panel-KNX VISUALIZATION

Interra 10,1'' i4 Touch-Panel, the choice of the ones in search of a product that inherits hardware, software and interface capable of responding all projects with a modern design, is able to be used in every kind of space and surface. This system that provides the most convenient solutions to all needs in smart-buildings combines comfort with ease and creates difference.


Power Supply  : 12 V 1.2A
Power Consumption  :  3 W (nominal) - 10W (max)
Cpu  :  ARM® Cortex?-A7 Dual-Core  2 x 1.2 GHz
Memory  :  Min 1 GB  DDR3
Storage  :  Min 8 GB with EMMC (sandisk) disc technology
KNX  :  Certificated by KNX.org
OS  :  Android 4.2.2 / Linux (Debian / Ubuntu / Fedora / Linaro )
USB  :  2x USB-HOST with USB2.0 spec, 1xUSB-OTG
RTC  :  System includes RTC with CR1220 battery
SDCard  :  Standard SD-TF card connector up to 64Gbyte storage
Ethernet  :  100Mbps
USB WIFI   : Supported

17304
ITR-110-0104 INTERRA 10.1'' TOUCH PANEL-KNX VISUALIZATION
17440 ITR-107-0104 Interra 7'' Touch Panel-KNX VISUALIZATION

Interra 7" i4 Touch-Panel, the choice of the ones in search of a product that inherits hardware, software and interface capable of responding all projects with a modern design, is able to be used in every kind of space and surface. This system that provides the most convenient solutions to all needs in smart-buildings combines comfort with ease and creates difference.


Power Supply  : 12 V 1.2A
Power Consumption  :  3 W (nominal) - 10W (max)
Cpu  :  ARM® Cortex?-A7 Dual-Core  2 x 1.2 GHz
Memory  :  Min 1 GB  DDR3
Storage  :  Min 8 GB with EMMC (sandisk) disc technology
KNX  :  Certificated by KNX.org
OS  :  Android 4.2.2 / Linux (Debian / Ubuntu / Fedora / Linaro )
USB  :  2x USB-HOST with USB2.0 spec, 1xUSB-OTG
RTC  :  System includes RTC with CR1220 battery
SDCard  :  Standard SD-TF card connector up to 64Gbyte storage
Ethernet  :  100Mbps
USB WIFI   : Supported

17440
ITR-107-0104 INTERRA 7'' TOUCH PANEL-KNX VISUALIZATION
19056 ITR-300-0000 Iswitch body gateway PUSH BUTTONS

Main unit with BCU Main unit with knx gateway (interface and communication part, BCU. This part has mounting holes for fixing in standart electrical box- 1 gang-.This part is designed to be used in all models.)

Watch it on Light& Building 2018 https://youtu.be/qAGCf2njfcI

19056
ITR-300-0000 ISWITCH BODY GATEWAY PUSH BUTTONS
19057 ITR-301-0001 COVER 1 KEY Iswitch one button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19057
ITR-301-0001 COVER 1 KEY ISWITCH ONE BUTTON BLACK PLASTIC PUSH BUTTONS
19062 ITR-301-0100 COVER 1 KEY Iswitch one button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19062
ITR-301-0100 COVER 1 KEY ISWITCH ONE BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19065 ITR-301-0200 COVER 1 KEY Iswitch one button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19065
ITR-301-0200 COVER 1 KEY ISWITCH ONE BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19066 ITR-301-0301 COVER 1 KEY Iswitch one button GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19066
ITR-301-0301 COVER 1 KEY ISWITCH ONE BUTTON GLASSEF PUSH BUTTONS
19067 ITR-302-0001 COVER 2 KEY Iswitch 2 button plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19067
ITR-302-0001 COVER 2 KEY ISWITCH 2 BUTTON PLASTIC PUSH BUTTONS
19072 ITR-302-0100 COVER KEY Iswitch two button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19072
ITR-302-0100 COVER KEY ISWITCH TWO BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19080 ITR-302-0200 COVER 2 KEY Iswitch two button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19080
ITR-302-0200 COVER 2 KEY ISWITCH TWO BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19082 ITR-302-0301 COVER 2 KEY Iswitch two button GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19082
ITR-302-0301 COVER 2 KEY ISWITCH TWO BUTTON GLASSEF PUSH BUTTONS
19083 ITR-304-0001 COVER 4 KEY Iswitch four button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19083
ITR-304-0001 COVER 4 KEY ISWITCH FOUR BUTTON BLACK PLASTIC PUSH BUTTONS
19104 ITR-304-0100 COVER KEY Iswitch 4 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19104
ITR-304-0100 COVER KEY ISWITCH 4 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19113 ITR-304-0200 COVER 4 KEY Iswitch button natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19113
ITR-304-0200 COVER 4 KEY ISWITCH BUTTON NATURAL STAINLESS STEEL PUSH BUTTONS
19114 ITR-304-0301 COVER 4 KEY Iswitch button black GlassEF PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19114
ITR-304-0301 COVER 4 KEY ISWITCH BUTTON BLACK GLASSEF PUSH BUTTONS
19115 ITR-306-0001 COVER 6 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19115
ITR-306-0001 COVER 6 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19122 ITR-308-1001 COVER 8 KEY Iswitch four button plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19122
ITR-308-1001 COVER 8 KEY ISWITCH FOUR BUTTON PLASTIC PUSH BUTTONS
19129 ITR-308-1100 COVER 8 KEY Iswitch LCD 8 button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19129
ITR-308-1100 COVER 8 KEY ISWITCH LCD 8 BUTTON (ALUMINIUM) PUSH BUTTONS
19132 ITR-308-1200 COVER 8 KEY Iswitch LCD 8 button (natural stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19132
ITR-308-1200 COVER 8 KEY ISWITCH LCD 8 BUTTON (NATURAL STAINLESS STEEL) PUSH BUTTONS
19133 ITR-308-1301 COVER 8 KEY Iswitch LCD 8 button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19133
ITR-308-1301 COVER 8 KEY ISWITCH LCD 8 BUTTON (NATURAL GLASS) PUSH BUTTONS
19136 ITR-306-0101 COVER KEY Iswitch 6 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19136
ITR-306-0101 COVER KEY ISWITCH 6 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19139 ITR-306-0301 COVER 6 KEY Iswitch button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19139
ITR-306-0301 COVER 6 KEY ISWITCH BUTTON (NATURAL GLASS) PUSH BUTTONS
19141 ITR-308-0001 COVER 8 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19141
ITR-308-0001 COVER 8 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19146 ITR-308-0100 COVER KEY Iswitch 8 button natural aluminium eloxal mat unbrashed PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

 

19146
ITR-308-0100 COVER KEY ISWITCH 8 BUTTON NATURAL ALUMINIUM ELOXAL MAT UNBRASHED PUSH BUTTONS
19152 ITR-308-0200 COVER 8 KEY Iswitch natural stainless steel PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19152
ITR-308-0200 COVER 8 KEY ISWITCH NATURAL STAINLESS STEEL PUSH BUTTONS
19153 ITR-308-0301 COVER 8 KEY Iswitch 8 button (natural glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19153
ITR-308-0301 COVER 8 KEY ISWITCH 8 BUTTON (NATURAL GLASS) PUSH BUTTONS
19155 ITR-310-0001 COVER 10 KEY Iswitch button black plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19155
ITR-310-0001 COVER 10 KEY ISWITCH BUTTON BLACK PLASTIC PUSH BUTTONS
19170 ITR-310-0100 COVER 10 KEY Iswitch button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19170
ITR-310-0100 COVER 10 KEY ISWITCH BUTTON (ALUMINIUM) PUSH BUTTONS
19173 ITR-310-0200 COVER 10 KEY Iswitch button (natural stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19173
ITR-310-0200 COVER 10 KEY ISWITCH BUTTON (NATURAL STAINLESS STEEL) PUSH BUTTONS
19174 ITR-310-0301 COVER 10 KEY Iswitch button (Glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19174
ITR-310-0301 COVER 10 KEY ISWITCH BUTTON (GLASS) PUSH BUTTONS
19176 ITR-302-1001 COVER 2 KEY with LCD plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19176
ITR-302-1001 COVER 2 KEY WITH LCD PLASTIC PUSH BUTTONS
19182 ITR-302-1100 COVER 2 KEY Iswitch LCD 2 button (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19182
ITR-302-1100 COVER 2 KEY ISWITCH LCD 2 BUTTON (ALUMINIUM) PUSH BUTTONS
19185 ITR-302-1200 COVER 2 KEY Iswitch LCD 2 button (stainless steel) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19185
ITR-302-1200 COVER 2 KEY ISWITCH LCD 2 BUTTON (STAINLESS STEEL) PUSH BUTTONS
19186 ITR-302-1301 COVER 2 KEY Iswitch LCD 2 button (GlassEF) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19186
ITR-302-1301 COVER 2 KEY ISWITCH LCD 2 BUTTON (GLASSEF) PUSH BUTTONS
19189 ITR-304-1001 COVER 4 KEY with LCD plastic PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19189
ITR-304-1001 COVER 4 KEY WITH LCD PLASTIC PUSH BUTTONS
19194 ITR-304-1100 COVER 4 KEY with LCD (aluminium) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19194
ITR-304-1100 COVER 4 KEY WITH LCD (ALUMINIUM) PUSH BUTTONS
19197 ITR-304-1301 COVER 4 KEY with LCD (glass) PUSH BUTTONS

Iswitch

PI CONTROL - Iswitch, with the new generation of automation switch can provide self-directing. For instance, the ambiance detector automatically adjusts the place’s light level according to the change. Moreover, through Iswitch PI control feature, it can learn spontaneously and perform desired functions in the room.

Containing multi-functions within wide variety of materials and colors, Imini
is preparing to take its place on stage with the latest technology of VATN
Screen. Lighting and thermostatic controls are performed simply on screen
as weel as the home modes. With integrated lighting and temperature
sensors it provides to command the places automatically.
• Working with KNX bus voltage, it does not require a power source
• Integrated temperature and humidity sensors
• Integrated light sensor (1/64k Lux)
• RGB status leds and blue steering leds
• Up to 12 Configuration Buttons
• Wide material and custom color options
• Color theme and contrast can be defined via ETS
• It can be used as stand-alone unit control room
• Automatic proportional integral control
• Room / living area adaptation

 

Power :Self powered (No need for external 30V DC supply)
Sensors :Integrated Temperature / Humidity Sensor
  :Integrated Ambient Light Sensor (1 to 64k lux)
Lighting :RGB status LEDs and blue navigation LED
Featuring :Time dependent & Auto-adjusting dimming
  :(seperated LCD backlight and status LED dimming)
  :Can be used as Standalone Room Controller**
  :Automated PI Tuning Function***
Operating Voltage :Operating Voltage over Bus 21 .. 32 VDC
  :Operating Voltage over RJ11* 12 VDC or 3.3V DC
  :Power Consumption from KNX~120 mW
Working Temperature : -5 .. +45 °C
Wall Mounting :Ø 60 mm Flush Mount (Standard electrical wall mount box)

19197
ITR-304-1301 COVER 4 KEY WITH LCD (GLASS) PUSH BUTTONS
19268 ITR-110-0204 Interra 10.1'' black aluminum frame SIN FAMILIA
Interra 10.1'' black aluminum frame
19268
ITR-110-0204 INTERRA 10.1'' BLACK ALUMINUM FRAME SIN FAMILIA
19847 ITR-401-0000 KNX water flood detector SMART METERING

Flood detectors are used to detect the accumulating water as a result of punctured pipes, wet spots or sewage leaks, etc. Device designed to give visual and audible warning after detection, it also transmits the warning signal to the system as KNX or dry contact.

Interra flood detectors, which are considered essential for safety and protection, stand out with their rapid communication and design that can be applied to every floor.

It has LED indicators (Power Green, Alarm Red) to display power/alarm conditions and an integrated alarm (buzzer). Additionally, normally closed and normally open contact outputs are available.
 

The device has an active/passive jumper for Power LED / Alarm LED / Buzzer, and alarm LEDs and alarm can be controlled independently.


 

There are 3 different delay jumpers in the device to provide alarm detection delay. 0/3/6 second delays can be identified on this screen.


 

When an alarm is triggered, the contacts change position. Also, the power LEDs go off and the alarm LEDs go on. Once the area is dry, the alarm goes off, the power is turned back on and the contacts return to their original position.

19847
ITR-401-0000 KNX WATER FLOOD DETECTOR SMART METERING
20062 ITR831-001 KNX-DMX Gateway GATEWAYS

ITR831-001 KNX-DMX Gateway module supports two-way control,
and can record, play and delete DMX programs. With recording
time up to 4 hours, KNX-DMX Gateway can be widely used to con-
trol devices with built-in DMX protocol port for LED color control,
such as computer light, moving head light, laser light, etc.
LAYOUTS AND WIRING DIAGRAM
• Installation - Distribution box
• Programming - This device is standard KNX system device and can
only be programmed by ETS software.
• Don’t connect KNX DC power to other load channels before KNX Bus
installation and wiring.
• Auxiliary power supply - An additional DC 24V power supply should
be connected to DMX interface of the module.
• Do not get AC 240V voltage into Bus wire, it will damage all of devices
in system.
IMPORTANT NOTES
• 3 working modes: DMX recorder mode, DMX dimming mode
( EIB to DMX) and DMX to EIB conversion mode (1bit, 1byte data
point)
• Supported communication signal: DMX512-1990, ArtNet DMX
• Store and playback up to 24 programs, maximum recording time:
4 hours
• DMX recorder mode supports switching and dimming up to 48
channels, which means controlling DMX device via KNX system.
• DMX to EIB conversion mode supports switching and absolute
dimming via DMX signal for up to 48 channels, which means con-
trolling KNX system via DMX storage control function.
• DMX output signal can be used to control devices with built-in
DMX protocol port for LED color control, such as computer light,
moving head light, laser light, etc.
• DMX input control functions for KNX system include:Sequence
control, Scene control, Switch control, Relative dimming, Absolute
dimming.
20062
ITR831-001 KNX-DMX GATEWAY GATEWAYS
20066 ITR901-001 KNX IP ROUTER SYSTEM DEVICES
ITR901-001 is a KNXnet/IP routing & tunneling device and works as KNX
IP line/area coupler. An external power supply is not necessary. The abil-
ity to address all bus devices in the KNX bus system makes network opera-
tions less time-consuming. Operational and filtering states, malfunction
and faulty communication are indicated by LEDs. UPnP is available and
the firmware can be updated by a comfortable Web front-end.
ITR901-001 connects the two communication media Ethernet/ KNX IP
and KNX TP to feature (for all bus devices connected):
• Commissioning
• Addressing
• Setting parameters
• Visualization
• Protocol
• Diagnostic operations
ITR901-001 is able to filter the traffic according to the installation place
in the bus system hierarchy and according to the built-in filter tables for
group oriented communication. Configuring from the subline can be
blocked. Message filtering can be temporarily deactivated by a single
button press. The time period to automatically switch back to normal
operation is ETS-configurable. To ease commissioning, temporary access
to other lines is possible also without download from the ETS
20066
ITR901-001 KNX IP ROUTER SYSTEM DEVICES
17602 ITR-810-0001 SIP server, 10 DIN units SIN FAMILIA

Interra makes SIP Server based visual-intercom possible.

SIP Server is supported by a 12V-2A DC power supply. This supply is the same of the one with 3 green pins, used widely at industrial market. Pin indicators are written on a plastic cover. Middle pin is for earthing and does not have usage anymore. Resetting button on top cover is used for hand resetting of the device.  This button also has LED indicator. LED lamps light up as system runs.

17602
ITR-810-0001 SIP SERVER, 10 DIN UNITS SIN FAMILIA
17603 ITR-820-0001 Interra IS Server, 10U SIN FAMILIA

Interra IS is designed to provide life spaces with comfort and ease. Interra IS is supplied by 12V-2A DC source. This DC source is the same of the one with 3 green pins, used widely at industrial market. Pin indicators are written on a plastic cover. Middle pin is for earthing and does not have much usage. Resetting button on cover is for re-booting the device automatically. This button also has LED indicator. LED lamps light up as system runs.

17603
ITR-820-0001 INTERRA IS SERVER, 10U SIN FAMILIA
17631 ITR-110-9004 Interra 10,1'' Screen flush mouting box I4 VISUALIZATION
Interra 10,1'' Screen flush mouting box I4
17631
ITR-110-9004 INTERRA 10,1'' SCREEN FLUSH MOUTING BOX I4 VISUALIZATION
17664 ITR-107-0201 Frames for Interra 7" Screen VISUALIZATION
Upper and lower frame for INTERRA 7 "screen.

Magnetic fixation.
17664
ITR-107-0201 FRAMES FOR INTERRA 7" SCREEN VISUALIZATION
17674 ITR-107-9004 Interra 7" Screen Flush mounting box VISUALIZATION
PVC flush mounting box.
17674
ITR-107-9004 INTERRA 7" SCREEN FLUSH MOUNTING BOX VISUALIZATION
19274 ITR-165-0204 Imini frame OTHER ACCESSORIES
Imini acrlic black frame frame
19274
ITR-165-0204 IMINI FRAME OTHER ACCESSORIES
19276 ITR-165-9004 flush mount box for Imini (Standart 2 gang electric box) OTHER ACCESSORIES
flush mount box for Imini (Standart 2 gang electric box)
19276
ITR-165-9004 FLUSH MOUNT BOX FOR IMINI (STANDART 2 GANG ELECTRIC BOX) OTHER ACCESSORIES
19759 ITR-630-0001 HOTEL ROOM PLATE KNX DND (13 cm x 23 cm) KNX 12 VDC* OTHER ACCESSORIES
KNX DND (13 cm x 23 cm) KNX 12 VDC* as feeding ITR-412-0030 is necessary.
19759
ITR-630-0001 HOTEL ROOM PLATE KNX DND (13 CM X 23 CM) KNX 12 VDC* OTHER ACCESSORIES
19845 ITR-212-0005 EIO Comfort Box Web HOTEL building automation GATEWAYS

The digital I/O module is available with 12 inputs/12 outputs. Additionally 2 sensors can be added. Both device
versions support the following functions:
- On/Off
- Toggle
- Timer
- Shutters 230 V~
- Shutters 24 V s
- External dimmer (available only with the EEA001A external dinner, not supplied).

EIO12S, with sensors, supports also the control of heating or cooling systems since it includes 2 temperature and humidity sensors.

PRODUCT DESCRIPTION
- Inputs: 12 dry contacts
- Outputs: 12 ON/OFF relay outputs
- Push button for navigation of menus
- LCD screen for viewing the I/O and menus
- 230 V terminals
- RJ45 network connector

The complete configuration of the device is performed via a friendly user interface. “EIO12S.exe” application must be installed in the user computer. Ethernet connection is required.

19845
ITR-212-0005 EIO COMFORT BOX WEB HOTEL BUILDING AUTOMATION GATEWAYS
19848 ITR-830-0001 KNX Mitsubishi gateway In-device GATEWAYS

Mitsubishi gateway

ITR830 is a gateway that provides bidirectional communication between the KNX home and building automation
system and Mistsubishi Electric air-conditioning system. ITR830 used for monitoring and control functioning parameters of Mitsubishi Electric air condition units with KNX. Thus the air conditioning system can be controlled from home and building automation system. ITR830 is compatible with models in PAC, RAC and City Multi VRF
and Industrial types categorized in AP.1 sold by Mitsubishi Electric.
ITR830 is connected inside the AC indoor unit, it connects one side directly to the electronic circuit of the AC
indoor unit (cable supplied) and in the other side directly to the KNX bus.

 

The most outstanding features of ITR830 are:
- Bidirectional control of Mitsubishi Electric AC units
- Control of the main functions of the air condition unit: On/Off, operating mode, setpoint, fan level
control and vane position control
- AC unit error notifications for exception errors
- Control with up to five scenes
- Working hours counter, timer, window contact and standby functions are available as special functions
- Three dry contact to integrate into KNX (i.e. motion detector, evacuation pump, window contact)
- 4 logic gates and 3 customisable logic functions for each gates are available
- 8 converters are available to convert data types
- Module alive beacon notification

19848
ITR-830-0001 KNX MITSUBISHI GATEWAY IN-DEVICE GATEWAYS
19851 ITR-610-0000 One button villa type - SIP intercom out door- station with 1.3 MP - camera stainless steel - 1 FUAR VIDEO DOOR ENTRY SYSTEM

 One button villa type - SIP intercom out door- station with 1.3 MP - camera stainless steel - 1 FUAR

Product Code: ITR-610-0000
Product features:
• Color 1.3 MP CMOS Camera
• 120 ° wide angle lens and angle adjustment
• Night Vision support
• Easy installation with backlit name tag and single button
• Rtsp streaming
• SIP Protocol support
• Door opening support with DTMF Protocol and URL
• Snapshot for Touch Panel in Missed Call (R & D process)
• Turkish Language Support (R & D process)

19851
ITR-610-0000 ONE BUTTON VILLA TYPE - SIP INTERCOM OUT DOOR- STATION WITH 1.3 MP - CAMERA STAINLESS STEEL - 1 FUAR VIDEO DOOR ENTRY S...
20063 ITR901-002 KNX Line Coupler SYSTEM DEVICES
Basic functionality of the TP line coupler ITR900-3000 is coupling two KNX
TP lines (main line and subline) providing galvanic isolation in between.
Due to its flexibility ITR900-3000 coupler unit can be used as KNX line cou-
pler or KNX area coupler (to connect a TP line to a TP area or backbone) or
KNX repeater (without filtering). Operational and filtering states, malfunc-
tion and faulty communication are indicated by LEDs.
ITR900-3000 is able to filter the traffic according to the installation place in
the bus system hierarchy and according to the built-in filter tables for
group oriented communication.
ITR900-3000 supports long messages (up to 240 byte APDU length) and
features, for commissioning/troubleshooting, a configurable “Manual
Function” with single button press activation and automatic switch-off to
temporarily deactivate filtering. Available functions are:
• Suppress device configuration from the subline
• Suppress device oriented telegrams
• Trace the subline traffic
• Enable/disable filtering of Group telegrams or Physical telegrams
• Reduced number of retransmissions option available
• Diagnostic functions
20063
ITR901-002 KNX LINE COUPLER SYSTEM DEVICES
20064 ITR900-116 KNX Power supply 640 mA with additional ouput SYSTEM DEVICES
KNX power supplies generate and monitor the KNX system voltage
(SELV). The bus line is decoupled from the power supply by an inte-
grated choke. The voltage output is short-circuit and overload protect-
ed. The two-colour LED indicates device output status. Device type
ITR900-6000 has an additional 30 V DC short-circuit and overload
protected voltage output that can be used to power an additional bus
line (in combination with a separate choke).
20064
ITR900-116 KNX POWER SUPPLY 640 MA WITH ADDITIONAL OUPUT SYSTEM DEVICES
20065 ITR500-001   6CH 10A BALLAST DIMMING MODULE ACTUATORS - OUTPUTS

ITR500-001 can dimming from 0V to 10V for per channel. The out-
puts for MAX 10A be switched ON or OFF on every output channel,
also can manually switch. Control types include both input and
output, so, Absorption and output type ballast can be connected to
this module.

• 6 Channel 0-10V dimming and maximum 10A relay output for
every channel. also can manually switch.
• The switch functions: Statistical total ON time, Status response,
Status recovery, Upper limit, Lower limit, Staircase light, Scene
control, Scene dimming, Sequence control, Threshold switch,
Heating actuator( PWM)

• Labeling for AC power wires, loads wires and KNX/EIB wire
• Mount the device on a DIN rail of DB
• Connect wires for loads
• Make sure there is no circuit short or open.
• Make sure the KNX cable type is correct and has no circuit short
• Connect KNX cables. Make sure the color is correct
• Tidy the all Wire and separate KNX wire from AC power wire

 

20065
ITR500-001   6CH 10A BALLAST DIMMING MODULE ACTUATORS - OUTPUTS
20067 ITR411-001 CEILING MOUNT INDOOR MICROWAVE PRESENCE TEMPERATURE SENSOR DETECTORS

includes 4 independent logic blocks and 1 combined
logic block, the logic relation can be “AND” “OR” , logic input condi-
tions can be the condition of LUX sensor, microwave sensor, temper-
ature sensor, dry contact, external telegram.

• Built-in LUX sensor, microwave sensor, temperature sensor, dry
contact, external telegram.
• The multi-function motion sensor have 5 logic function blocks and
can be set the logical relation AND/OR, Each with 10 output ob-
jects. The work mode include single mode and Master & Slave
mode.
• The multi-function motion sensor can report movement status, Lux
status to KNX system.
• The multi-function motion sensor supports constant brightness
output.
• It can controls for Switch control, Absolute dimming control, Shut-
ter control, Alarm control, Percentage control, Sequence control,
Scene control, String (14 bytes) control, Threshold control, Logic
combination.

 

20067
ITR411-001 CEILING MOUNT INDOOR MICROWAVE PRESENCE TEMPERATURE SENSOR DETECTORS
20068 HDR-60-12 MEANWELL 12V 4,5A POWER SUPPLY for INTERRA TOUCH PANEL SYSTEM DEVICES
Meanwell 12V 4,5A Power Supply for INTERRA TOUCH PANEL AND DND
20068
HDR-60-12 MEANWELL 12V 4,5A POWER SUPPLY FOR INTERRA TOUCH PANEL SYSTEM DEVICES


KNX SPECIAL CATALOGUES
Push buttons
Smart metering
MDT Catalog 2017
Iddero Verso Interactive Presentation

LEARN
Free webinars
uBrick Tutorials
VideoTutorials CBSE
TEST
Free test of CBSE visualization

LATEST KNX NEWS
All news

LATEST KNX OFFERS
All offers
DOWNLOADS
KNX - All brands

FUTURASMUS KNX GROUP
Contact
Location
Futurasmus in the world
FOLLOW US
YouTube Channel
Facebook
LinkedIN
Google+
Twitter

KNX++ TRAINING CENTER
Futurasmus Zentrum
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".