If you still haven't created an account in our Web site and you are a professional from the sector, we invite you to do so. It is completely free and it will allow you to:
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
· 4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
TECHNICAL DATA
Nominal voltage: 24 V DC (21–30 V DC)
Power consumption: 0.4 W
Detection angle: 180°
Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height
Installation height: 1–3 m
PIR Sensors: 3 pyro sensors for extensive detection
Sensitivity: Adjustable in 10 steps via ETS
Settings: All settings can be parameterized via ETS3
Illuminance measurement: Light sensor with optical filter and linear output
Illuminance value: Lux Value export via bus
KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol
Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE
Temperature range: -20 to +40 °C
Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)
SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)
SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
· 4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
TECHNICAL DATA
Nominal voltage: 24 V DC (21–30 V DC)
Power consumption: 0.4 W
Detection angle: 180°
Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height
Installation height: 1–3 m
PIR Sensors: 3 pyro sensors for extensive detection
Sensitivity: Adjustable in 10 steps via ETS
Settings: All settings can be parameterized via ETS3
Illuminance measurement: Light sensor with optical filter and linear output
Illuminance value: Lux Value export via bus
KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol
Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE
Temperature range: -20 to +40 °C
Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)
SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)
SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions)
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
· 4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
TECHNICAL DATA
Nominal voltage: 24 V DC (21–30 V DC)
Power consumption: 0.4 W
Detection angle: 180°
Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height
Installation height: 1–3 m
PIR Sensors: 3 pyro sensors for extensive detection
Sensitivity: Adjustable in 10 steps via ETS
Settings: All settings can be parameterized via ETS3
Illuminance measurement: Light sensor with optical filter and linear output
Illuminance value: Lux Value export via bus
KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per pol
Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE
Temperature range: -20 to +40 °C
Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions)
SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions)
SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions
The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:
· 2-channel constant light control
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:
· 2-channel constant light control
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:
· 2-channel constant light control
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
The family of Swiss Garde 360 Presence KNX/KLR RA/EA presence detectors is characterised by the following outstanding features:
· 2-channel constant light control
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel with parametrisable switch-on delay. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux (2 Byte)
· 3 pyro detectors The presence detectors’ three PIR sensors with 360° high resolution lenses of two different diameters detect even the smallest of movements and can be activated individually or in groups of two and three.
4 different lenses The product executions RA with a round and EA with a square lens cover are each available with 16 or 30 m detection ranges.
Ultra-flat mini KNX presence detector with constant light control
The presence detector Swiss Garde Hokuspokus KNX/KLR is characterised by the following outstanding features:
· 2-channel constant light control
The in-built 2-channel constant light control can be easily adjusted to meet any customer’s needs.
The two light channels can be controlled via a parametrisable offset (-50%, synchronous, +50%) using different light values.
· 1 light output for switching, dimming or scenery selection.
· Standby light
If the light channel is set to dimming absolute, an emergency standby light can be programmed using the standby value [%] and standby duration [min/h]. Two value pairs can be read out from the KNX bus.
· 1 HVAC-channel controls heating, ventilation and air conditioning. This output can be used for presence detection. Additionally, alarm systems with parametrisable switch-on delay can be created.
· 1 brightness output in lux(2 Byte)
· 2 pyro detectors Two PIR sensors with an elliptic 360° detection area can be activated individually or in pairs.
Reliable detection of smallest movements in offices and lounges, 2-channel, version for flush mounting
• Ideal for offices, schools, conference rooms etc. • Two independent channels each for lighting and HVAC • Automatic or semi-automatic operation • Potential-free HVAC channe
Flacher Präsenzmelder für den Deckeneinbau. Steht nur 1mm von der Decke ab! Spart Energie und Stromkosten.
Technische Daten
Nennspannung: 230 Volt/50Hz Schaltleistung: 2300 W / 10A max. (cos phi = 1) 1150 VA / 5A max. induktiv (cos phi = 0,5) Zeiteinstellung: Impuls ca.1 sec (20 oder 60 sec Pause), (Per RC) ca. 10, 30 sec, 1, 2, 6, 10, 20min Dämmerung: 5, 50, 150, 2000 Lux, oder Speicherung IR Fernbedienung: Auto / On / OFF (4-6m Reichweite)
Erfassungsbereich: Deckenmontage 360°, Elliptisch Reichweite: ca. 8m bei Flacher Linsenposition ca. 12m bei 3mm Linsenhöhe ca. 16m bei 6mm Linsehöhe Präsenzfunktion: ca. 4 bis 8m Ø max. sitzend
Dimensionen: 42mm Ø x 49mm (effektiv) 42mm Ø x 2mm bis 8mm (Sichtmass) Deckenbohrung: 37 bis 38mm
• Adjustment of all LUX/SENS/Time parameters via P-IR remote control • Send button for complete parameter transmission in one go • Memory function for all set parameters
button functions
- sEnD = Ok Transmitting and saving of all set parameters in the movement detector (Sens, Time, Lux).
-.On/OFF Switch the light either on or off for 6 hours. Subsequently the unit will switch back to “Auto” mode.
- auTO Automatic function in accordance with settings for the movement detector.
-TEsT The movement detector test is independent of the ambient light value.
Impulse pause Select the duration of the pause between 2 pulses with the impulse-pause button:
20 or 60 s for optimised control of stairwell lighting systems.
lux value read-in function Saving of the current prevailing ambient brightness value as a switch-on threshold.
Your advantages • For improved detection, even in obstructed spaces • Sensitive movement detection at frontal approach • The HF sensor also reacts well with high temperatures • Detects smallest movements even without free line of sight of the moving persons • Suitable for hidden installation (with wood, open metal etc.) • Timer, light and range controller • Ideal for invisible integration in lights or behind trim • Zero-crossing switching for relay protection
Preisgünstiger UP-Wandmelder mit Handschalter Ein/Aus/Automatik Tolerant bei der Detektion von Kleintieren
Nennspannung: 230 V / 50 Hz Schaltleistung: 1000 W / 5 A (cos f 1,0) 250 VA / 1,25 A (cos f 0,5) Erfassungsbereich: 180 Grad Reichweite: ca. 8 m frontal und ca. 4 m seitlich Montagehöhe: ca. 1- 1,5 m
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help.
Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".